"

亚博取现到账超快

"

Shenzhen Yongchang Xing Paper Co., Ltd.

Hotline:0755-29880806
简体中文

Common problem

Current position: Home > News> Common problem

Shenzhen carton manufacturer

Shenzhen Yongchang Xing Paper Co., Ltd. Hits:528 Publication time:2018-05-17 SmallmiddleBig

 Shenzhen carton manufacturer, carton custom Description: the difference between container and non container is mainly external diameter, and is closely related to the type of corrugated box. The following table will detail the relationship between the size, specification, manufacturing specification and outer diameter specification of the carton:

carton manufacturer

  Measurement of the size of corrugated cardboard box

  Shenzhen carton factory. The size is the size of the material, when it is made. The standard for measuring the expansion line. The stamping roller on the slitting machine is the groove which is pressed out at the position of the pressing line, and the pressing line is the centerline of the groove. The distance between the two lines is the size of the manufacturing. Table 2 can speed up the conversion of manufacturing dimensions to internal and external dimensions, but they also have their own measurement methods.

  Corrugated boxes are also divided into single bucket and double bucket in the production process.

  A single page forming box, usually used for small carton perimeter; also known as two boxes of Larry Paige, some Changtai cartons week, had to use two pieces of billet together in a carton, but sometimes the carton factory was cut off in order to use the remaining material in the production process, not too large two cartons, one piece of one piece. Sometimes four. The two page box has more than one box, so the area between the two boxes is slightly different.

  About the seams and waste of the Shenzhen carton factory. The size of the carton joint is determined according to the number of layers and the production process. Single corrugated cardboard 35 ~ 40mm, double corrugated board 45 ~ 50mm, and three watts corrugated board 50mm.

  Calculation of carton developed areas must take into account the loss of waste in the production process, according to the size of the plate waste, generally 20 ~ 40mm. In order to facilitate the calculation of actual work and adopt the unified "8" and "4" rules, the lateral and full joint waste is 8cm, and the vertical direction has been set to 4 centimeters.

  The products of Shenzhen carton factory have been pursuing the essence of quality. We provide our customers with timely and comfortable products and services, so that their business is better and their business environment is better. All our products have undergone a series of rigorous tests. Welcome the customers to call and use it. The company specializes in design and production, suitable for all kinds of packaging cartons.


亚博取现到账超快